Fujitsu S1500M - ScanSnap - Document Scanner User Manual

Replacing the Pick Roller
341
5. Rotate the pick roller bushing (left).
6. Remove the pick roller with its shaft.
Slightly pull up the left part of the pick roller shaft (about 5 mm), move it towards the left
side, and then raise it to remove from the ScanSnap.
If the around the pick roller is dirty by paper-powder, it may cause a scanning error.
Remove the dirt using a dry cloth slightly moistened with Cleaner F1 in order to prevent
errors.
Do not use water, mild detergent, or air-spray.
Shaft
Bushing
Pick roller
Pick roller
Shaft

Fujitsu S1500M - ScanSnap - Document Scanner Specifications

General

Brand	Fujitsu
Model	S1500M - ScanSnap - Document Scanner
Category	Scanner
Language	English