Fujitsu ScanSnap User Manual

Correcting Skewed Character Strings
When documents with skewed character strings are scanned, the ScanSnap is able to detect the
skewed character strings and correct them.
ATTENTION
If the Carrier Sheet is used for scanning, skewed character strings are not corrected.
HINT
When [Automatic detection] is specified for [Paper size] in the [Paper] tab of the ScanSnap setup
window, the skew in the image is always corrected. Therefore, [Deskew by text on document] does not
have to be enabled.
1. In the ScanSnap setup window, select the [Scanning] tab, and click the
[Option] button.
a The [Scanning mode option] window appears.
2. Select the [Deskew by text on document] checkbox.
For SV600, the [Deskew by text on document] checkbox is located in the [Image quality] tab of
the [Scanning mode option] window.
Correcting Skewed Character Strings
91

Fujitsu ScanSnap Specifications

General

Brand	Fujitsu
Model	ScanSnap
Category	Scanner
Language	English