Furuno FR-10 User Manual

7. CHART OVERLAY
7-4
7. Press the MENU key to close the menu
7.6 Depth Line Range
Up to 4 depth contour lines can be added to the selected range with the following pro-
cedures.
1. Press the MENU key to open the menu.
2. Select [Chart], then press the ENTER key.
3. Select [Depth Line Range], then press the ENTER key.
4. Select the range to display closely, then press the ENTER key.
5. Push  or on the cursorpad to select depth line (0 to +4) then press the ENTER
key.
6. After the setting is completed, press CANCEL/HL OFF
key to close the setting
menu.
7. Press the MENU key to close the menu
7.7 Chart Align
You can correct the gap between the radar image and the chart by below procedure.

Furuno FR-10 Specifications

General

Brand	Furuno
Model	FR-10
Category	Marine Equipment
Language	English