2. OPERATION
2-17
4. Press or to select [RNG/BRG] or [LAT/LON] then press the ENTER key.
Note: When [Nav] or [All] is selected on [Data Box] menu, latitude and longitude
of cursor is shown above data box. Therefore, the contents of data box is not
changed when [Lat/Lon] is selected.
5. Press the MENU key to close the menu.
2.14.2 Cursor Type
Cursor type can be selected as follows:
1. Press the MENU key to open the menu.
2. Press or to select [Others], then press the ENTER key.
3. Press or to select [Cursor Type], then press the ENTER key.
4. Press or to select [1] to [4] then press the ENTER key.
5. Press the MENU key to close the menu.
2.15 PI (Parallel Index) Lines
PI lines are useful for keeping a constant distance between own ship and a coastline
or a partner ship when navigating. Up to six PI lines are available depending on the
maximum number of PI lines selected on the menu.
You can control the presentation and interval of the PI lines from the [PI Lines] and [PI
Line Mode] menu.
2.15.1 How to set the maximum number of lines to display
The maximum number of PI lines to display can be selected from [Off], [2], [3] or [6]
lines. The number of visible lines on display can be less depending on the line interval
and selected display range.
1. Press the MENU key to open the menu.
)6HWXS *DLQ0RGH
&XUVRU7\SH
To Next Page
Loading...
Need help?
General
