v
FOREWORD
A Word to the Owner of the MU-231
Features
Program
xx: minor change
You can see these program numbers on the [SYSTEM] menu (see section 3.6). To open the
[SYSTEM] menu, unlock the key operation (see paragraph 3.2.2).
Note: When you connect the monitor unit to FMD-3300*, FAR-28x7 series, FEA-2807, FCR-28x7
series, FCR-28x9 series or FAR-33x0 series lock the key operation (see paragraph 3.2.2) after
confirming the program numbers.
*: To connect the monitor unit to the FMD-3300, the program version for the APR PROGRAM must
be 2651020-01.02 or higher.
CE Declarations
With regards to CE declarations, please refer to our website (www.furuno.com), for further infor-
mation on RoHS conformity declarations.
FURUNO Electric Company thanks you for purchasing the MU-231 23.1” Monitor Unit. We are
confident you will discover why the FURUNO name has become synonymous with quality and
reliability.
Since 1948, FURUNO Electric Company has enjoyed an enviable reputation for quality and re-
liability throughout the world. This dedication to excellence is furthered by our extensive global
network of agents and dealers.
Your equipment is designed and constructed to meet the rigorous demands of the marine envi-
ronment. However, no machine can perform its intended function unless properly installed and
maintained. Please carefully read and follow the operation, installation and maintenance proce-
dures set forth in this manual.
We would appreciate feedback from you, the end-user, about whether we are achieving our pur-
poses.
Thank you for considering and purchasing FURUNO.
The main features of the MU-231 are as shown below.
• Selectable screen from RGB (1 port), Digital (2 ports) or Composite (1 port).
• Main or remote display for radars, video sounders, sonars, plotter. For the connectable equip-
ment, see the SYSTEM CONFIGURATION on page vi.
• High resolution display of 1600 x 1200 (UXGA)
• Automatic brilliance adjustment by the light sensor.
• Picture-in-picture function
•
Power on/off automatically through the DVI signal.
Program Name Version Date of Change
APR PROGRAM 2651020-01.xx May. 2011
FPGA PROGRAM 2651021-01.xx May. 2011
To Next Page
Loading...
Need help?
General
