Furuno MU-231 - System Configuration

vi
SYSTEM CONFIGURATION
Connectable equipment
Note 1: Landscape orientation only.
Note 2: *: When inputting SXGA, a circle may be displayed as an ellipse because the aspect ratio
differs (see "DISP MODE*" on page 15).
Equipment Resolution Signal
FCV-1200L/1200LM VGA Analog RGB, via IF-8000
FSV-24/24S SXGA* Analog RGB
FSV-30/30S SXGA* Analog RGB
FSV-84/84L SXGA* Analog RGB
FSV-85/85L SXGA* Analog RGB
FCV-30 SXGA* Analog RGB
FAR-28x7 SXGA DVI
FEA-2807 SXGA DVI
FCR-28x7 SXGA DVI
FMD-3300 UXGA DVI
FCR-28x9 UXGA DVI
FAR-33x0 UXGA DVI
MFDBB (NAVnet 3D)
SVGA
DVIXGA
SXGA*
100-230 VAC
MONITOR UNIT
MU-231
Environmental category
MU-231: Protected from the weather
RGB
DVI (2 ports)
VIDEO (NTSC/PAL)
RS-232C
FSV-30/30S, etc.
FAR-28x7, FEA-2807,
FCR-28x7, FAR-33x0, etc.
CCD camera, DVD recorder, etc.
FEA-2807, FCR-28x7, etc.
RS-485
FMD-3300, FCR-28x9, FAR-33x0, etc.