owner’s manual for use with models 10, 20, 30 17
Navigation
EN
The scale
➍
refers to the distance
between dots on the course
deviation indicator.
Navigating with the Course
Pointer
Before you can navigate with the
course pointer, you must change
the pointer setting to Course
(CDI) (page 32).
1. Begin navigation to a destination
(page 14).
2. Select Compass.
3. Use the course pointer to
navigate to the destination
(page 16).
Elevation Plot
Elevation plotting is available on the
eTrex 30.
By default, the elevation plot
displays the elevation for an
elapsed time. To customize the
elevation plot, see page 32.
Select Elevation Plot.
Changing the Plot Type
You can change the elevation plot
to display pressure and elevation
over
time or distance.
1. Select Elevation Plot > menu
> Change Plot Type.
2. Select an option.
Viewing Details about a Point
on the Plot
Select an individual point on the
plot.
Details about the point appear
at the top of the plot.
Resetting the Elevation Plot
Select Elevation Plot > menu
> Reset > Clear Current
Track > Yes.
To Next Page
Loading...
