Navigating in Marine Mode
There are several ways to begin navigating to a point:
• Select a point on the map and press the NAV key.
• Press the NAV
key to activate a new route using the Find
Menu, or activate a saved route or track.
• Press the
FIND key to search for a particular item and create
a route to it.
Marine Mode and Automotive Mode are very similar. Most of the
features discussed here also apply to Automotive Mode.
Once you are actively navigating, you will see a magenta line that
always runs from your current location to the destination on the Map
page. You can use the Map page, Compass page, Highway page, and
Position Data page to help navigate to your destination.
Initiating Navigation
There are several different ways to initiate navigation. Press the
NAV key to open the Navigate Menu. Using one of the navigation
options, you can quickly create a route to your destination. In
Marine Mode, you can initiate Man OverBoard (MOB) navigation,
which places a waypoint in the location and then navigates you back
to that location. You can also initiate navigation through the Find
Menu.
Navigate Menu in Marine Mode
Accessed by pressing NAV/MOB key
Press the NAV key to open the Navigate Menu:
Go To Point—
allows you to select a waypoint or point of interest
from the Find Menu to navigate to.
Navigate Route—allows you to select a route to navigate. You can
also activate a saved route through the Routes tab of the Main Menu.
For information about routes, refer to page 21.
Navigate Track (TracBack)—
allows you to select a saved track to
navigate. You can also activate a saved track through the Track tab
of the Main Menu. For information about tracks, refer to page 37.
MOB (Man OverBoard)—creates a Man OverBoard waypoint and
navigates to that location.
GPSMAP 276C Owner’s Manual 15
BASIC OPERATION IN MARINE MODE > NAVIGATING IN MARINE MODE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
