viiiGTN 750: TUNING COM AND NAV FREQUENCIES
4. In the Add User Frequency window, locate the frequency
you want to delete and then touch Edit.
5. In the Edit User Frequency window, TOUCH Delete.
6. In the “Delete this User frequency?” window, TOUCH OK.
Tune a STBY nav frequency
1. TOUCH the NAV STBY window.
2. On the NAV Standby keyboard, TOUCH the numerals in
sequence to enter the frequency.
3. To load the new nav frequency into the nav STBY win-
dow, TOUCH Enter (or press the Small knob).
Swap active and STBY com or nav frequencies
1. TOUCH the active com or nav window.
e STBY frequency moves into the active com or nav win-
dow, and the previously active com or nav frequency swaps to the
corresponding STBY window.
Find a nav frequency
1. TOUCH the NAV STBY window.
2. On the NAV STBY keypad, TOUCH Find. e Find Re-
cent NAV Frequencies window appears.
a. For a recently used frequency, TOUCH the Recent tab.
TOUCH the Up and Down arrows to see more fre-
quencies in the list.
b. For the frequency of a nearby navaid, TOUCH the
Monitor both the active and STBY frequencies
Monitor allows you to listen to transmissions on the standby frequency while the active is quiet. Any transmis-
sion on the active frequency mutes the standby.
1. TOUCH the STBY window.
2. In the COM STBY window, touch Monitor.
Add a frequency to the User list
You can save up to 15 User frequencies.
1. TOUCH the COM STBY window.
2. On the COM STBY keypad, TOUCH Find. e Find Recent Com Frequencies window appears.
3. TOUCH the User tab.
4. In the Find User COM Frequencies window, TOUCH Add User Frequency.
5. On the User Frequency Name keypad, enter a name for the
frequency you want to save and then TOUCH Enter.
6. On the Add User Frequency window, TOUCH Frequency.
7. On the User Frequency keypad, enter the frequency digits and
then TOUCH Enter.
Delete a User frequency
1. TOUCH the COM STBY window.
2. On the COM STBY keypad, TOUCH Find. e Find Recent com Frequencies window appears.
3. TOUCH the User tab.
TIP
To load the new nav frequency di-
rectly into the active nav window
and move the active nav frequency
to the STBY window, TOUCH XFER.
To Next Page
Loading...
Need help?
General