Chapter 2 - Safety Information P50 Agile P153
1 HEALTH AND SAFETY
Personnel associated with the equipment must be familiar with the contents of this Safety Information.
When electrical equipment is in operation, dangerous voltages are present in certain parts of the equipment.
Improper use of the equipment and failure to observe warning notices will endanger personnel.
Only qualified personnel may work on or operate the equipment. Qualified personnel are individuals who
are:
• familiar with the installation, commissioning, and operation of the equipment and the system to which
it is being connected.
• familiar with accepted safety engineering practises and are authorised to energise and de-energise
equipment in the correct manner.
• trained in the care and use of safety apparatus in accordance with safety engineering practises
• trained in emergency procedures (first aid).
The documentation provides instructions for installing, commissioning and operating the equipment. It
cannot, however cover all conceivable circumstances. In the event of questions or problems, do not take any
action without proper authorisation. Please contact your local sales office and request the necessary
information.
To Next Page
Loading...
Need help?
General
