TAB
TRIM
COVER &
NON-TAB
TRIM
TAB
TRIM
COVER &
NON-TAB
TRIM
NBP
■ NBP Go/Stop: The NBP
Go/Stop button on the monitor
is a quick way to start or stop a
blood pressure measurement.
■ NBP Auto: This option allows
the monitor to be programmed
to take NBP readings
automatically at specific time
intervals.
• To Program NBP for the
Auto Mode:
– Select the NBP.
– Select NBP AUTO.
– A popup menu appears.
– Select MAIN MENU to
exit.
NOTE:
The NBP measurement for the auto option is set in
the monitor defaults and can be timed in two different ways:
1.
Regular Timing:
NBP measurement is taken at a specific
time interval regardless of the actual clock times.
2.
Clock Sync Timing:
NBP measurement is synchronized to
specific clock times.
NOTE: Turning the Auto mode Off, then On, restarts the timing
cycle.
NOTE: If a time interval greater than 60 minutes is selected,
AUTO is displayed in the NBP parameter window.
NBP GO/STOP:
Starts and Stops NBP.
To Next Page
Loading...
Need help?
General
