GE Invenia ABUS 2.0 User Manual

Preparing for Setup
Invenia ABUS 2.0 – System Setup and Basic Service Manual 3-43
4700-0043-00 Rev. 4
Location of the USB Flash Drive Ports
You can install the USB Flash Drive in one of the following USB
ports on the Invenia ABUS 2.0: two on the back panel of the
Display, and one on the back panel of the chassis (lower left,
next to the Ethernet port).
Figure 3-4. USB Port on the Display
Figure 3-5. USB Port on the Chassis
NOTE: USB Flash Drives approved for Invenia ABUS 2.0 are verified
for EMC performance according to EN55011 class B. The use of
any other USB Flash Cards will compromise this verification,
and may cause interference on Invenia ABUS 2.0 itself, or on
other electronic devices.

GE Invenia ABUS 2.0 Specifications

General

Brand	GE
Model	Invenia ABUS 2.0
Category	Medical Equipment
Language	English