Warnings and important information
Invenia ABUS 2.0 – System Setup and Basic Service Manual 8-3
4700-0043-00 Rev. 4
Warnings (continued)
NOTE: Use an ESD compatible work space or the ESD-kit during parts
replacement.
Manpower
Two people are required for:
• Anything over 35 LBS (16 KG)
DO NOT touch any boards with integrated circuits prior to
taking the necessary ESD precautions.
Always connect yourself, via an arm-wrist strap, to the advised
ESD connection point located on the rear of the Invenia ABUS
2.0 (near the power connector).
Follow general guidelines for handling of electrostatic sensitive
equipment.
The waste of electrical and electronic equipment must not be
disposed as unsorted municipal waste and must be collected
separately.
Please contact the manufacturer or other authorized disposal
company to decommission your equipment.
To Next Page
Loading...
Need help?
General
