GE Invenia ABUS 2.0 User Manual

Functional Checks
4-10 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Transporting the System (continued)
8. Load the unit aboard the vehicle carefully and over its center
of gravity. Keep the unit still and upright.
NOTE: Do not lay the unit down on its side.
9. Ensure that the system is firmly secured while inside the
vehicle. Any movement, coupled with the weight of the
system, could cause it to break loose.
10. Secure system with straps or as directed otherwise to
prevent motion during transport.
11. Prevent vibration damage by driving cautiously. Avoid
unpaved roads, excessive speeds, and erratic stops or
starts.
At the new location
When the unit is in place at a new location:
1. Lock the wheel brakes.
2. Position the Articulating Display Arm, Scan Arm, and Scan
Head Assembly away from a walking or work area.
3. Position the Scan Arm and Scan Head Assembly at the
lowest position.

GE Invenia ABUS 2.0 Specifications

General

Brand	GE
Model	Invenia ABUS 2.0
Category	Medical Equipment
Language	English