GE Invenia ABUS 2.0 User Manual

Replacement Procedures
8-6 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Cleaning the Filter / Replacement
Clean the filter on a monthly basis. This will also be performed
by the Service Engineer during their normal PM process. To
clean or replace the Filter,
Table 8-1: Cleaning the Filter
Steps Illustrations
1. Power down the system.
2. Remove the filter which is located on the bottom
of the Invenia ABUS 2.0.
The filter is attached using Velcro.
3. Vacuum the filter.

GE Invenia ABUS 2.0 Specifications

General

Brand	GE
Model	Invenia ABUS 2.0
Category	Medical Equipment
Language	English