GE LOGIQ E10 Service Manual

DIRECTION 5750007-1EN, REV. 1 LOGIQ E10 BASIC SERVICE MANUAL
9 - 54 Section 9-20 - Hardware Kit
Section 9-20 Hardware Kit (cont’d)
Use this Table 9-23 to help identify contents of the Hardware Kit, Box 2 (Figure 9-3) and keep them
organized.
Figure 9-3 Box 2 of P/N 5310019-2 Hardware Kit
Table 9-23 Box 2 of P/N 5310019-2 Hardware Kit Compartment Contents
Number Thumbnail Contents Where Used
31.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X6mm Long Zinc Plated
Steel_RoHS Fastener
Z Bracket; patient I/O filler; XYZ MC
32.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X8mm Long Zinc Plated
Steel_RoHS Fastener
Bracket CW filler; EMI cover PCI express cable; BEP5 door;
ground lead on arm adapter; removable fan tray side cover
33.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X10mm Long Zinc Plated
Steel_RoHS Fastener
Filler bracket; Column cover assy; Z-Mech; Op panel lower;
removable trackball screws; LCD mon to Ergotron arm; OLED
and 23" mon to arm
34.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X12mm Long Zinc Plated
Steel_RoHS Fastener
Subwoofer cable P clamp; Card rack cover (Vnav inside)
35.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X25mm Long Zinc Plated
Steel_RoHS Fastener
OP panel lower
36.)
Freedriv Cross Recessed Pan Head Machine
Screw_M4-0.7_ X35mm Long Zinc Plated
Steel_RoHS Fastener
Trackball (not removable)

GE LOGIQ E10 Specifications

General

Brand	GE
Model	LOGIQ E10
Category	Medical Equipment
Language	English