GE LOGIQ P5 Basic OB User Manual

GE HEALTHCARE
DIRECTION 5394141, REVISION 5 LOGIQ™ P5 SEVICE MANUAL
Section 4-7 - Keyboard Function Checks 4-29
Section 4-7Keyboard Function Checks
4-7-1 Main Keyboard Assy Function Validation Procedure
1.) Boot up the system.
2.) Insert the Service Dongle and go to the maintenance mode.
3.) Click 'Start' and go to 'Run'.
4.) Click the Run and then you can get the 'Run' dialog box.
5.) Write the 'cmd 'command into 'Run' dialog box and press 'OK' button to display command prompt.
Figure 4-26 Start and run
Figure 4-27 Run dialog box
Figure 4-28 command prompt

GE LOGIQ P5 Basic OB Specifications

General

Brand	GE
Model	LOGIQ P5 Basic OB
Category	Medical Equipment
Language	English