GE NX-4-EUR User Manual

Keypad functions for the NX-148 LCD keypad
The LCD keypads have a bilingual user’s interface. As a result, you can simply select a user’s
function on the menu. You can consult the menu by entering the [*] key.
The user of the system can easily switch from one user’s interface to another and the other
way around.
To select a user’s function, following steps have to be performed.
Step 1 Enter the [*] key until the function you want, appears on the LCD display /
screen.
Ex.
Select an option
90 = Log Review
Step 2 To select the option, you must press the appropriate option number next to
the option (ex. Consulting Log Review = option 90)
To exit the user’s menu, press the [#] key.
If you already know the option (ex. Log Review = 90) you can immediately select the wanted
option by pressing the [*]-[9]-[0] keys. By doing this you don’t have to browse through the
user’s menu.
In the following table you will find all functions that can be executed by the user.
USER’S MENU
Option Description English (1) Description English (2)
▲▼
Zone Review Zone Review
0 Set Tone Set Tone
1 Master Mode Master Mode
2 Service Check Service Check
3 Alarm Memory Alarm Memory
41 Telephone # 1 Telephone # 1
42 Telephone # 2 Telephone # 2
43 Telephone # 3 Telephone # 3
44 Test Test
45 Display test Display test
46 Light Control Light Control
49 English (2) English (1)
5 User PIN User PIN
6 User Authority User Authority
7 Detector Reset Detector Reset
90 Log Review Log Review
91 View Settings View Settings
97 Set Date/Time Set Date/Time
CHIME Walktest Walktest
EXIT Silent Exit Silent Exit
NX-4-EUR Installation manual Page 21 02/07/06

GE NX-4-EUR Specifications

General

Brand	GE
Model	NX-4-EUR
Category	Control Panel
Language	English