GE PACE Series User Manual

PACE Series SCPI Manual
K0472 Revision A 4-87
:SOUR:PRES:INL:TIME
Applicability: PACE5000, PACE6000
Command Syntax
:SOURce[x][:PRESsure]:INLimits:TIME <number>
where x = 1 or 2 is the module number (default - 1)
Parameter: <integer> in-limits time in seconds
Short form: :SOUR:INL:TIME <number>
Function: Sets the time that the pressure has to be within limits before
generating a service request.
Default: 2 seconds
minimum 2 seconds
maximum 999 seconds
Query Syntax
:SOURce[x][:PRESsure]:INLimits:TIME?
where x = 1 or 2 is the module number (default - 1)
Short form: :SOUR:INL:TIME?
Function: Query in-limits timers.
Response: Number representing in-limits time in seconds.
Description
Sets the in-limits timer value.
Example
TX> :SOUR:PRES:INL:TIME?
RX> :SOUR:PRES:INL:TIME 2
Can be set to 99 by issuing command:
TX> :SOUR:PRES:INL:TIME 99
TX> :SOUR:PRES:INL:TIME?
RX> :SOUR:PRES:INL:TIME 99
Or to 999 by issuing command:
TX> :SOUR:PRES:INL:TIME 999
TX> :SOUR:PRES:INL:TIME?
RX> :SOUR:PRES:INL:TIME 999

GE PACE Series Specifications

General

Brand	GE
Model	PACE Series
Category	Test Equipment
Language	English

Summary

PACE SCPI Manual

Pressure Automated Calibration Equipment

Describes the product line of automated calibration equipment.

SCPI Remote Communications Manual

Manual detailing SCPI protocol for remote control of PACE instruments.

Document Overview

Safety Information

Essential safety instructions for operating the PACE Series equipment.

Technical Advice and Documentation

Guidance on obtaining technical support and related documents.

Abbreviations and Codes

Abbreviations List

Glossary of common abbreviations used throughout the manual.

Code Definitions

Explanations of SCPI command codes and mnemonics.

1 Introduction

General Information

Overview of SCPI protocol and its application to PACE Series instruments.

Remote and Local Operation

Explains how to switch between remote and local control modes.

2 Command Structure

Command Notation and Terminators

Details SCPI command syntax, structure, and message termination rules.

Program Headers

Explains the keywords used to identify commands and queries.

SCPI Data Types

Describes the various data formats used in SCPI communication.

3 Status System

Status Registers Overview

Explains SCPI status reporting and the instrument's register implementation.

Status Reporting Details

Covers output queue, event groups, status bytes, and error handling.

Instrument Errors

Details error codes, messages, and how errors are stored and retrieved.

4 Command and Query Summary

Command Structure and Subsystems

Overview of command organization, subsystems, and command syntax.

Common SCPI Commands

Lists and describes standard SCPI commands prefixed with '*'.

Instrument Control Commands

Lists and describes instrument-specific SCPI commands prefixed with ':'.

5 Errors

Error Codes and Messages

Comprehensive list of SCPI and device-specific error codes and their meanings.