GE PACE Series User Manual

4 Command and Query Summary
K0472 Revision A 4-30
:INST:UNIT
Applicability: PACE1000, PACE5000, PACE6000
Command Syntax
n/a
Parameter:
Short form:
Function:
Query Syntax
:INStrument:UNIT?
where: x = 1, 2…32 is the unit number. It defaults to 1.
Short form: :INST:UNIT?
Function: Used to query the units of measurement available. This does not query
the current unit in use (refer to the ‘UNIT’ family of commands/queries).
Response: Enumerated character string.
Description
This command sets the units of measurement available to the instrument.
TX> :INST:UNIT1?
RX> :INST:UNIT MBAR
TX> :INST:UNIT12?
RX> :INST:UNIT12 KG/M2
TX> :INST:UNIT23?
RX> :INST:UNIT23 INH2O_4
TX> :INST:UNIT2?
RX> :INST:UNIT2 BAR
TX> :INST:UNIT13?
RX> :INST:UNIT13 MMH2O_4
TX> :INST:UNIT24?
RX> :INST:UNIT24 INH2O_20
TX> :INST:UNIT3?
RX> :INST:UNIT3 PA
TX> :INST:UNIT14?
RX> :INST:UNIT14 CMH2O_4
TX> :INST:UNIT25?
RX> :INST:UNIT25 INH2O_60
TX> :INST:UNIT4?
RX> :INST:UNIT4 HPA
TX> :INST:UNIT15?
RX> :INST:UNIT15 MH2O_4
TX> :INST:UNIT26?
RX> :INST:UNIT26 FTH2O_4
TX> :INST:UNIT5?
RX> :INST:UNIT5 KPA
TX> :INST:UNIT16?
RX> :INST:UNIT16 MMH2O_20
TX> :INST:UNIT27?
RX> :INST:UNIT27 FTH2O_20
TX> :INST:UNIT6?
RX> :INST:UNIT6 MPA
TX> :INST:UNIT17?
RX> :INST:UNIT17 CMH2O_20
TX> :INST:UNIT28?
RX> :INST:UNIT28 FTH2O_60
TX> :INST:UNIT7?
RX> :INST:UNIT7 MMHG
TX> :INST:UNIT18?
RX> :INST:UNIT18 MH2O_20
TX> :INST:UNIT29?
RX> :INST:UNIT29 USER1
TX> :INST:UNIT8?
RX> :INST:UNIT8 CMHG
TX> :INST:UNIT19?
RX> :INST:UNIT19 TORR
TX> :INST:UNIT30?
RX> :INST:UNIT30 USER2
TX> :INST:UNIT9?
RX> :INST:UNIT9 MHG
TX> :INST:UNIT20?
RX> :INST:UNIT20 ATM
TX> :INST:UNIT31?
RX> :INST:UNIT31 USER3
TX> :INST:UNIT10?RX>
:INST:UNIT10 INHG
TX> :INST:UNIT21?
RX> :INST:UNIT21 PSI
TX> :INST:UNIT32?
RX> :INST:UNIT32 USER4
TX> :INST:UNIT11?
RX> :INST:UNIT11 KG/CM2
TX> :INST:UNIT22?
RX> :INST:UNIT22 LB/FT2

GE PACE Series Specifications

General

Brand	GE
Model	PACE Series
Category	Test Equipment
Language	English