GE PACE6000 Technical Manual

4 Command and Query Summary
K0472 Revision A 4-116
:SYST:COMM:SER:CONT:XONX
Applicability: PACE1000, PACE5000, PACE6000
Command Syntax
:SYSTem:COMMunicate:SERial:CONTrol:XONXoff
Parameter: Integer
Short form: SYST:COMM:SER:XONX
Function: Sets the serial communication handshaking of:
0: NONE
1: XON/XOFF
2: RTS/CTS
Query Syntax
:SYSTem:COMMunicate:SERial:CONTrol:XONXoff?
Short form: SYST:COMM:SER:CONT:XONX?
Function: Queries serial communication handshaking.
Response: Returns an integer of 0, 1, 2.
Description
Selects serial communications interface handshaking. The command query requests the
current serial communication handshaking.
Example:
TX> :SYST:COMM:SER:CONT:XONX?
RX> :SYST:COMM:SER:CONT 0
The current hardware handshaking is NONE
It can be set to RTS/CTS by sending:
TX> :SYST:COMM:SER:CONT 2
The integer of 0, 1, 2 represents:
0: NONE
1: XON/XOFF
2: RTS/CTS

GE PACE6000 Specifications

General

Brand	GE
Model	PACE6000
Category	Test Equipment
Language	English