To Next Page

To Previous Page

PACE Series SCPI Manual

K0472 Revision A 4-21

INST:SENS:CALD

Applicability: PACE1000, PACE5000, PACE6000

Command Syntax

n/a

Parameter:

Short form:

Function:

Query Syntax

:INST:SENS[x]:CALD[y]?

where x (sensor number) = 1, 2. . . . . 8 (default -1) y = 1, 2, 3 . . . . .10 (y times last calibration date)

Short form: :INST:SENS:CALD?

Function: Queries sensor calibration dates.

Response: Returns sensor [x] with [y] calibration date:

where x is the sensor number.

x = 1, 2. . . . . 8

where y is the y

calibration date for sensor x.

y = 1, 2, 3 . . . . .10 calibration dates stored for each sensor.

Description

This query returns the following:

Example

This shows that the module 2 control sensor was last calibrated on 21

November 2009 and

the previous calibration was on 17

November 2009.

x Sensor PACE5000, PACE6000 Sensor PACE1000

1 Module 1: control sensor Internal sensor1

2 Module 1: source pressure +ve Internal sensor 2

3 Module 1: source pressure -ve Internal sensor 3

4 Module 1: barometric range (optional) External IDOS-1

5 Module 2: control sensor External IDOS-2

6 Module 2: source pressure +ve External IDOS-3

7 Module 2: source pressure -ve -

8 Module 2: barometric range (optional) -

TX> :INST:SENS5:CALD1?

RX> :INST:SENS5:CALD 2009, 11, 21

TX> :INST:SENS5:CALD2?

RX> :INST:SENS5:CALD2 2009, 11, 17

GE PACE6000 Technical Manual

Other manuals for GE PACE6000