GE T35 UR Series User Manual

GE Multilin T35 Transformer Protection System 6-23
6 ACTUAL VALUES 6.5 PRODUCT INFORMATION
6
6.5PRODUCT INFORMATION 6.5.1 MODEL INFORMATION
PATH: ACTUAL VALUES  PRODUCT INFO  MODEL INFORMATION
The order code, serial number, Ethernet MAC address, date and time of manufacture, and operating time are shown here.
ETHERNET MAC ADDRESS — UR devices with firmware 7.0x and above have three Ethernet ports that can be used on three
networks. The MAC address displays for port 1. The MAC address for port 2 is one higher. The MAC address for port 3 is
one higher than port 2. In redundant mode, the MAC addresses for ports 2 and 3 are the same as port 2.
6.5.2 FIRMWARE REVISIONS
PATH: ACTUAL VALUES  PRODUCT INFO  FIRMWARE REVISIONS
The shown data is illustrative only. A modification file number of 0 indicates that, currently, no modifications have been
installed.
 MODEL INFORMATION

ORDER CODE LINE 1:
T60-E00-HCH-F8H-H6A
Range: standard GE Multilin order code format;
example order code shown
MESSAGE
ORDER CODE LINE 2:
Range: standard GE Multilin order code format
MESSAGE
ORDER CODE LINE 3:
Range: standard GE Multilin order code format
MESSAGE
ORDER CODE LINE 4:
Range: standard GE Multilin order code format
MESSAGE
SERIAL NUMBER:
Range: standard GE Multilin serial number format
MESSAGE
ETHERNET MAC ADDRESS
000000000000
Range: standard Ethernet MAC address format
MESSAGE
MANUFACTURING DATE:
0
Range: YYYY/MM/DD HH:MM:SS
MESSAGE
CT/ VT ADVANCED DIAG
ACTIVE: No
Range: Yes, No
MESSAGE
OPERATING TIME:
0:00:00
Range: operating time in HH:MM:SS
MESSAGE
LAST SETTING CHANGE:
1970/01/01 23:11:19
Range: YYYY/MM/DD HH:MM:SS
 FIRMWARE REVISIONS

T60 TransformerRelay
REVISION: 7.0x
Range: 0.00 to 655.35
Revision number of the application firmware.
MESSAGE
MODIFICATION FILE
NUMBER: 0
Range: 0 to 65535 (ID of the MOD FILE)
Value is 0 for each standard firmware release.
MESSAGE
BOOT PROGRAM
REVISION: 3.01
Range: 0.00 to 655.35
Revision number of the boot program firmware.
MESSAGE
FRONT PANEL PROGRAM
REVISION: 0.08
Range: 0.00 to 655.35
Revision number of faceplate program firmware.
MESSAGE
COMPILE DATE:
2004/09/15 04:55:16
Range: Any valid date and time.
Date and time when product firmware was built.
MESSAGE
BOOT DATE:
2004/09/15 16:41:32
Range: Any valid date and time.
Date and time when the boot program was built.

GE T35 UR Series Specifications

General

Brand	GE
Model	T35 UR Series
Category	Protection Device
Language	English