GE Vivid E7 User Manual

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 7 - Diagnostics / troubleshooting 7 - 13
Section 7-8
Motor Controller Test
This test program tests the XYZ Motor Controller. It also includes a software recovery procedure for
Lock Release.
Follow this procedure to start the Motor Controller Test:
1.) Power up the VIVID E9 / VIVID E7.
After scanner initialization is complete, continue with the steps below;
2.) Press CONFIG … on the Utility tab on the Touch Panel.
3.) Log on as ADM. A password for the user ADM may be required.
Select System from the bottom of the menu that appears on the monitor.
4.) Select Test.
5.) Select MotorController Test
The following dialog is displayed on the screen.
Figure 7-2 Test screen

GE Vivid E7 Specifications

General

Brand	GE
Model	Vivid E7
Category	Medical Equipment
Language	English