GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 10 - Care & maintenance 10 - 1
Chapter 10
Care & maintenance
Section 10-1
Overview
10-1-1 Periodic maintenance inspections
It has been determined by engineering that your VIVID E9 / VIVID E7 system does not have any high
wear components that fail with use, therefore no Periodic Maintenance inspections are mandatory.
However, some customers’ Quality Assurance Programs may require additional tasks and or
inspections at a different frequency than listed in this manual.
10-1-2 Purpose of this chapter
This chapter describes Care & Maintenance on the VIVID E9 / VIVID E7 and peripherals. These
procedures are intended to maintain the quality of the VIVID E9 / VIVID E7’s performance. Read this
chapter completely and familiarize yourself with the procedures before performing a task.
10-1-3 Contents in this chapter
10-1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
10-2 Why do maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
10-3 Maintenance task schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
10-4 Tools required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-5
10-5 System maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
10-6 Electrical Safety Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-14
10-7 When there's too much leakage current … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-28