GE Vivid E95 User Manual

Warnings and important information
Vivid E80/E90/E95 – Service Manual 8-5
GC091052 Rev. 3
Manpower - When two persons are needed
Two persons are required for:
• Casters Replacement
The rest of the replacement procedures can be carried out by
one person.
Tools needed for servicing Vivid E80/E90/E95
The following tools (TORX bits or drivers) are needed to service
the Ultrasound system. Screw diameter and standard torque
values are also included. If the torque is not indicated with the
procedure, hand tighten the screws/nuts.
Table 8-1: Tools used for servicing the Vivid E80/E90/E95
ITEM NO. TOOL SIZE TORQUE COMMENTS
1.
BIT # TX-10 M2.5 • Use Torque specified in
procedure.
• If the torque is not indicated
with the procedure, hand
tighten the screws / nuts.
• 90 degree “L” are suggested.
• A full set of 90 degree “L” TORX
wrenches are recommended.
2.
BIT # TX-15 M3
3.
BIT # TX-20 M4
4.
BIT # TX-25 M5
5.
BIT # TX-30 M6
6.
BIT # TX-45 M10
7.
FLAT BLADE
DRIVER
3.2 mm
8.
FLAT BLADE
DRIVER
4 mm
9.
FLAT BLADE
DRIVER
6 mm
10.
PHILLIPS
DRIVER
PH1
11.
PHILLIPS
DRIVER
PH2
12.
PHILLIPS
DRIVER
PH3
13.
HEX KEY 5 mm (Unbrako Key /
Allen Key)

GE Vivid E95 Specifications

General

Brand	GE
Model	Vivid E95
Category	Medical Equipment
Language	English