GE Vivid E95 User Manual

Replacement Procedures
8-68 Vivid E80/E90/E95 – Service Manual
GC091052
Rev. 3
Remove the XYZ Control Assembly
Follow this procedure to remove the XYZ Control Assembly:
1. Disconnect the cables to the XYZ Control Assembly.
2. Unscrew and remove two (2x) screws.
3. Pull the top of the XYZ Control Assembly forwards, up and
away from the bracket.
Install the XYZ Control Assembly
Follow this procedure to install the XYZ Control Assembly
1. Thread the XYZ Control Assembly into position.
2. Install the three screws at the top, rear. (M6x16 sunken.
Torque: 9.8 Nm.)
3. Install the two remaining screws on the top. (M4x8, sunken.
Torque: 4.9 Nm.)
4. Connect the cables to the XYZ Control Assembly.
5. Install the Top Cover.
6. Install the Rear Cover.
7. Install the Left Side Cover.

GE Vivid E95 Specifications

General

Type	Cardiovascular Ultrasound System
Transducers	2D, 3D, 4D
Display	22-inch high-resolution OLED monitor
Portability	Cart-based
Imaging Modes	2D, 3D, 4D, Color Doppler
Advanced Features	cSound Architecture
Connectivity	DICOM, USB, Ethernet
Applications	Cardiology, Vascular, Abdominal