10 ADV200 SP • Quick start up guide - Specification and installation
2.1 Drive type designation
The main technical characteristic of the drive are showed in the product code and in the nameplate.
I.e. product code:
ADV200-SP -EH 1 040 -K B X -4 -DC -SI
Safety card EXP-SFTy-ADV inclusa
DC bus power supply version
Rated voltage :
4 = 400Vac
4A = 460Vac
Software: X = standard
Braking unit:
X = non included
B = included
Keypad:
X = not included
K = included
Drive power, in kW: 015 = 1.5 kW
022 = 2.2 kW
030 = 3.0 kW
040 = 4.0 kW
055 = 5.5 kW
075 = 7.5 kW
110 = 11.0 kW
150 = 15.0 kW
185 = 18.5 kW
220 = 22.0 kW
300 = 30.0 kW
370 = 37.0 kW
450 = 45.0 kW
550 = 55.0 kW
750 = 75.0 kW
900 = 90.0 kW
1100 = 110.0 kW
1320 = 132.0 kW
1600 = 160.0 kW
Mechanical drive sizes:
1 = size 1
2 = size 2
3 = size 3
4 = size 4
5 = size 5
6 = size 6
External heatsink drive models with IP54 protection degree
Drive ADV200 SP series
Type :ADV200-SP-2075 -KBX-4 S/N: 07012345
Inp: 400Vac-15% 500Vac +5% 50/60Hz 3Ph
14A@400Vac 12,6A@480Vac 350-750Vdc 18A@540Vdc
Out :0-480Vac 500Hz 3Ph 7,5kW@400Vac 10 Hp @ 460Vac
7,5kW 16,5A @400V 14,9A@460V Ovld. 110%-60s
5,5kW 13A @400V 11,7A@460V Ovld. 150%-60s
÷
Modello inverter
Numero di serie
Ingresso (tensione di alimentazione, frequenza,
Corrente di ingresso a coppia costante)
Uscita (tensione, frequenza, potenza, corrente,
sovraccarico CT e sovraccarico VT)
Approvazioni
GEFRAN DRIVESAND MOTION S.R.L.
via G.Carducci, 24 I-21040-Gerenzano (VA)
Made in ItalyFactory ID: G
IND.CONT.
EQ 31 KF
Firmware & cards revision level nameplate
Cards revision
Firmware revision
Power
Regulation
Safety
Braking unit
Software
revision
Product
configuration
Firmware HW release S/N 07012345
Prod.
Release
DFPRS INT-P SW .CFG
CONF
2.00 -.G -.L 10.10.10 A2
data sheet) of the motor concerned.
-
To Next Page
Loading...
Need help?
General
