12 ADV200 SP • Quick start up guide - Specification and installation
3.2 Permissible Environmental Conditions
Temperature
storage ��������������� -25…+55°C (-13…+131°F), class 1K4 per EN 60721-3-1
-20…+55°C (-4…+131°F), for devices with keypad
transport �������������� -25…+70°C (-13…+158°F), class 2K3 per EN 60721-3-2
-20…+60°C (-4…+140°F), for devices with keypad
Air humidity
storage ��������������� from 5% to 95 % and from 1 g/m
3
to 29 g/m
3
(class 1K3 as per EN 60721-3-1)
transport �������������� 95 % (3), 60 g/m
3
(4)
A light condensation of moisture may occur for a short time occasionally if the device is not in operation (class 2K3 as per
Air pressure:
storage ��������������� [kPa] 86 to 106 (class 1K4 as per EN 60721-3-1)
transport �������������� [kPa] 70 to 106 (class 2K3 as per EN 60721-3-2)
-
The drive is suitable for use under the environmental service conditions (climate, mechanical, pollu-
3.3 Disposal of the device
The ADV200 SP
the disposal of electronic components.
Pursuant to Article 26 of Italian Legislative Decree no. 49 of 14 March 2014 “Implementation of Directive
2012/19/EU on waste electrical and electronic equipment (WEEE)”
at the end of its useful life.
the same on how to have the equipment collected separately at the end of its useful life.
Attention
To Next Page
Loading...
Need help?
General
