2 ADV200 SP • Quick start up guide - Specification and installation
Information about this manual
The ADV200 SP Quick start guide is a handy-sized manual for mechanical installation, electrical connection
and fast start-up.
Software version
This manual is updated according the software version V 2.x.1 + Solar Pump V 2.x.46.4. application
checked with the Firmware ver.rel - PAR 490 parameter, menu 2.5.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the term
“Drive” will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a safe place and
Gefran Drives and Motion S.r.l. has the right to modify products, data and dimensions without notice. The data
Thank you for choosing this Gefran product.
-
dress is the following: techdoc@gefran.com.
All rights reserved
To Next Page
Loading...
Need help?
General
