40 ADV200 SP • Quick start up guide - Specification and installation
6 - Use of the keypad
6.1 Description
T+ T- EN LOC ILim n:0 AL
01 MONITOR
02 DRIVE INFO
03 STARTUP WIZARD
04 DRIVE CONFIG
7 virtual leds line:
Four alphanumeric lines
with 21-digit each
led is lit
led is off
Membrane keyboard :
• commands
• navigation
LCD display
Membrane keyboard
Inverter control programming menu navigation keys.
Symbol Reference Description
Start Starts the motor
Stop Stops the motor
ESC Escape
the list of the last 10 parameters and from the Goto parameter function (see CUST).
FWD
REV
Forward/
Reverse
Reverses the direction of rotation of the motor
LOC
REM
Local/Re-
mote
Changes the method of use from local to remote and vice versa.
RST Reset
CUST Custom
Pressing this key a second time activates the Goto parameter function for access to a parameter
key.
DISP Display Displays a list of drive functioning parameters.
E Enter
Up Moves selection in a menu or a list of parameters up.
Down Moves the selection in a menu or a list of parameters down.
Left Returns to the higher level menu.
Right
LED’s meaning:
T+
T-
LOC The led is lit when the drive is in local mode and OFF when in remote mode.
Ilim
n=0
AL
To Next Page
Loading...
Need help?
General
