GMV5 Home DC Inverter Multi VRF Units
104
4.4.11. Setting of Preset Water Heating
Setting of preset water heating:
Under water heating mode, press ―MODE‖ button to switch to preset mode (Then wired
controller will remind user to set the preset time. If unit is already in preset mode, skip this step).
Press ―TIMER‖ button and the character ―Preset‖ blinks.
Press ―▲‖ or ―▼‖ to adjust the preset time for water heating. Press ―ENTER/CANCEL‖ button
to complete the setting.
Cancellation of preset water heating:
Under water heating mode, press ―MODE‖ button to switch to preset mode (If unit is already in
preset mode, skip this step). Press ―TIMER‖ button and the character ―Preset‖ blinks. Press
―ENTER/CANCEL‖ button to cancel the setting.
Setting of preset water heating is as below:
To Next Page
Loading...
Need help?
General