GMV5 Home DC Inverter Multi VRF Units
66
3.2 Buttons
3.2.1 Graphics of Buttons
Fig.2.1 Graphics of Buttons
3.2.2 Function Instructions of Buttons
Table 2.1 Function Instructions of Buttons
(1) Set up & down swing function
(2) Select and cancel function
(1) Set operating temperature of indoor unit
(2) Set Timer
(3) Switch among Quiet mode, Air grade, Clean grade and set the maximum
and minimum temperature under Save mode.
(4) Set and inquire parameters
Switch among Auto, Cooling, Drying, Fan, Heating, Floor Heating, 3D Heating
and Warming modes. (Note: Floor Heating, 3D Heating and Warming will show
up when the unit has those functions.)
Switch among Air, Quiet, Light, Health, Absence, Save, Clean, E-heater and
X-fan functions.
Switch among Auto, Low Speed, Medium-low Speed, Medium Speed,
Medium-high Speed, High Speed and Turbo Speed.
Press and hold Increase button and Decrease button for 5 seconds to enter or
cancel Child Lock function.
3.3 Installation and Debugging of Wired Controller
Fig.3.1 Dimension of Wired Controller
To Next Page
Loading...
Need help?
General