To Next Page

To Previous Page

5. Assembly

PNEG-750-G2 16" Series II Sweep 131' and 135' Diameter 25

Flighting Assembly

A. Lay out the flight sections in order of assembly starting with the head flight working towards the

tail flight.

B. Using the connecting stubs, bolt the flight sections together with hex bolts and lock nuts. Make sure

the flight ends are in time with each other.

Figure 5C

C. Slide the end stub through the bearing plate on the tail section and into the tail flight securing it with

hex bolts and lock nuts.

Figure 5D

Other manuals for GSi Sweep II Series

Questions and Answers:

Need help?

Do you have a question about the GSi Sweep II Series and is the answer not in the manual?

General