To Next Page

To Previous Page

5. Assembly

PNEG-750-G2 16" Series II Sweep 131' and 135' Diameter 37

Channel Extension Kit

A. 131' and 135' Sweeps need an extension kit installed.

B. Attach the center weight weldments to the adjustable center weight channel using eight (8)

1/2" x 1-1/4" bolts, split lock washers and hex nuts. The adjustable center weight has three (3) sets

of holes for the center weight weldments to adjust the weights. (See Figure 5T.)

Figure 5T

C. Place assembly on top of the back tail section, around the tires. The end of the adjustable center

weight should be placed under the tail frame. (See Figure 5U.)

Figure 5U

D. Fasten assembly to tail section using two (2) 3/8" x 2-7/16" U-bolts, four (4) 3/8" lock washers and

four (4) 3/8" hex nuts.

Other manuals for GSi Sweep II Series

Questions and Answers:

Need help?

Do you have a question about the GSi Sweep II Series and is the answer not in the manual?

General