HIKVISION DS-7108HGHI-E1 User Manual

Digital Video Recorder User Manual
171
13.6 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on DVR so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General
2. Check the status of each HDD which is displayed on the list, as shown in Figure 13. 23.
Figure 13. 23 View HDD Status (1)
If the status of HDD is Normal or Sleeping, it works normally. If the status is Uninitialized or Abnormal, please
initialize the HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in System Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure 13. 24.
Figure 13. 24 View HDD Status (2)

HIKVISION DS-7108HGHI-E1 Specifications

General

Brand	HIKVISION
Model	DS-7108HGHI-E1
Category	DVR
Language	English