Digital Video Recorder User Manual
41
Figure 2. 25 Successfully Added IP Cameras
Please refer to Chapter 17.1 Specifications for the number of connectable IP cameras for different models.
Table 2. 1 Explanation of the icons
Edit basic parameters of the camera
Add the detected IP camera.
The camera is disconnected; You can
click the icon to get the exception
information of camera.
Play the live video of the connected
camera.
Advanced settings of the camera.
Upgrade the connected IP camera.
Shows the security status of the camera
to be active/inactive or the password
strength (strong/medium/weak/risky)
2.5.3 Editing the Connected IP Cameras
After the adding of the IP cameras, the basic information of the camera is listed on the page, you can configure the
basic settings of the IP cameras.
Steps:
1. Click the icon to edit the parameters; You can edit the IP address, protocol and other parameters.
Figure 2. 26 Edit the Parameters
Channel Port: If the connected device is an encoding device with multiple channels, you can choose the
channel to connect by selecting the channel port No. in the dropdown list.
To Next Page
Loading...
Need help?
General