Hikvision USA, Inc. – Series DS-7300 User Manual
• MAIN/SPOT/ZOOM- Button: The MAIN/SPOT/ZOOM- button is used to switch between main and spot
output. In PTZ Control mode, it can be used to zoom the camera out.
• PTZ/IRIS- Button: The PTZ/IRIS- button is used to enter the PTZ Control mode. When in the PTZ Control
mode, it is used to close the iris of the PTZ
• PREV/FOCUS- Button: The PREV/FOCUS- button is used to switch between single screen and multi-screen
mode. In PTZ Control mode, it is used to adjust the focus in conjunction with the A/FOCUS+ button. It can also be
used to select entire masked areas, such as in Motion Detection and Privacy Mask menus.
•A/FOCUS+ Button: A/FOCUS+ button is used to adjust focus in the PTZ Control menu. It is also used to
switch between input methods (upper and lowercase alphabet, symbols and numeric input). It can also be used
to clear entire masked areas, such as in the Motion Detection and Privacy Mask menus.
• SHIFT Button: Switch between control button and alphanumeric button. If “STATUS” indicator is in red, it
means that buttons are alphanumeric buttons.
5. DIRECTION/ENTER Buttons:
• DIRECTION Buttons: The DIRECTION buttons are used to navigate between different fields and items in
menus. In Playback mode, the Up and Down button is used to fast-forward and rewind recorded video. The Left
and Right button will select the next and previous day of recordings. In Preview mode, these buttons can be used
to cycle through channels.
• ENTER Button: The ENTER button is used to confirm selection in any off the menu modes. It can also be
used to tick checkbox fields. In Playback mode, it can be used to play or pause the video. In Single Play mode,
pressing the ENTER button will advance the video by a single frame.
6. JOG SHUTTLE Control: The JOG SHUTTLE control can be used to move the active selection in a menu. In the
Playback mode, the outer ring is used to speed up/slow down the video. The inner ring can be used to jump 30
seconds forward/backwards in a video. In Preview mode, it can be used to cycle through different channels.
7. CD/DVD Slot: For use with internal CD/DVD writer.
Note: If GUARD indicator is blue (default), all alarm event and exception settings are valid. Otherwise, alarm
event and exception settings will be invalid, but normal recording will still be available.
Note: It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be
able to move on to the next field.
To Next Page
Loading...
Need help?
General