HIKVISION DS-7300 Series User Manual

Hikvision USA, Inc. – Series DS-7300 User Manual
62
Managing System
Upgrading the System Firmware
The system firmware for your DVR can be updated from a USB storage device.
To update the system firmware:
1. Enter the Firmware Upgrade menu, shown in Figure 56 by going to Main Menu > Maintenance > Firmware
Upgrade.
Figure 56. Firmware Upgrade Menu
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the firmware file. The firmware file is named digicap.mav.
5. Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after the upgrade is
completed. If you do not wish to upgrade at this point, click the Cancel button.
Restoring Default Settings
To restore factory default settings to your DVR:
1. Enter the Factory Default menu, shown in Figure 57 by going to Main Menu > Maintenance > Factory
Default.
Figure 57. Factory Default Menu

HIKVISION DS-7300 Series Specifications

General

Brand	HIKVISION
Model	DS-7300 Series
Category	DVR
Language	English