Hikvision USA, Inc. – Series DS-7300 User Manual
Figue 16. PTZ Control Mode
3. Control the PTZ using PTZ control buttons. Pan and tilt PTZ by clicking on the directional
buttons. Zoom in and out using the Zoom In/Out buttons and recall presets, patrols and patterns by
clicking the number next to the corresponding icons.
4. Click the Close icon to return to Live Feed mode.
Note: PTZ parameters for the camera must be set correctly before the PTZ can be controlled.
Note: A maximum of five presets, patrols and patterns can be displayed on this interface. More presets,
patrols and patterns can be recalled in the PTZ Configuration menu.
• Audio: Enable/disable audio for selected display. To enable or disable audio:
1. Select display to enable/disable audio.
2. Enable audio by clicking the Enable Audio icon and disable audio by clicking the Disable Audio
icon. An error message similar to the one shown in Figure 17 will pop up if the Enable Audio option is
not selected in the Display Configuration menu for the specified channel.
Figue 17. Enable Audio Error Window
• Digital Zoom Mode: Enable digital zoom on the selected channel. Once enabled, the regular
feed will be shown in the lower right corner while the zoomed in view will be shown on the full
screen. The zoomed in region may be changed by moving the red rectangle in the regular feed
window.
• Full Screen Mode: Enable full screen mode for selected display. To enable full screen mode:
1. Select display to enable full screen on.
2. Click the Full Screen icon.
3. Click the Exit Full Screen icon to return to normal display mode.
To Next Page
Loading...
Need help?
General