HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
11
interface.
2. Configure the PC IP address. Ensure it is on the same network segment with the IP address of management
network interface. The default IP address of management network interface is 10.254.254.254.
Steps:
1. Open web browser.
2. Input the storage system IP address (https://10.254.254.254:2004) in Web browser address bar.
3. Press Enter.
1.3 Activation and Login
Steps:
 If the device has not been activated, you need to activate the device first before login.
1. Set the password for the admin user account.
2. Click OK to login to the device.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case
letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
 If the device is already activated:
1. Select a login system.
 Basic Management: Used to configure basic parameters of the storage system.
 Hybrid SAN: Used to log in to the hybrid SAN system.
2. Select User.
3. Enter Password.
4. Mode is Advanced Mode by default.
5. Click Enter.
Login

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English