HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
44
Chapter 6 Hybrid SAN Sub-System
Purpose:
You can configure the parameters for Hybrid SAN sub-system.
Table 6. 1 Module Description
Module
Description
Information
Encoding device, record schedule, and record volume information are listed.
Encoding Device
You can add and manage encoding devices, adjust CVR sub-system time, count
remaining recoding capacity, and analyze video loss.
Preview and Record
You can view encoding device status and live view image, and start and stop manual
record of one or more encoding devices.
Strategy and Alarm
You can configure recording schedule, create uploading task and schedule, and
configure alarm parameter.
Download and play
You can search, archive, backup, lock, play, and download recorded videos.
User Management
You can switch system language and edit display rows in each page.
System Config
You can configure system alarms and view CVR version.
Log Management
Log helps you figure out CVR history actions. You can search, export, and clear logs.
6.1 Access by Web Browser
Steps:
1. Open web browser.
2. Input the storage system IP address (https://10.254.254.254:2004) in Web browser address bar.
3. Press Enter.
4. Select Hybrid SAN as the system to log in.
5. Enter Password.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own
choosing (Using a minimum of 8 characters, including at least three of the following categories: upper
case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
6. Click Enter.
6.2 Information
Purpose:
Encoding device, record schedule, and record volume information are listed in Information > Information.

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English