HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
62
Chapter 8 System
Purpose:
You can configure network parameters, alarm triggered action, system time, modify system password, and so forth.
Table 8. 1 Module Description
Module
Description
Network
You can:
 Modify the configuration of management network interface and data network
interfaces.
 Bond data network interfaces.
 Remotely access the storage system via a specified gateway.
 Edit DNS server IP address, bond mode, and network work speed.
Alarm
You can:
 Send the storage system alarms to client via e-mail or SNMP manager.
Time
You can:
 Manually or automatically adjust system time.
Power Supply
You can:
● View UPS mode.
● Modify UPS power-off time.
● Modify supported UPS manufacturer.
Management
Tool
You can:
 Modify user password.
 Configure SMTP parameters.
 Test network communication between the storage system and a specified IP
address.
 Update the storage system.
 View service status.
8.2 Network
Purpose:
The storage system provides a management network interface and data network interfaces. The management
network interface is designed for configuring the data network interface and device maintenance. The data network
interfaces are used to transmit data.
8.2.1 Modify Data Network Interface
Steps:
1. Go to System > Network.
2. Click Modify in Basic Network Interface.
3. Enter new IP Address and Subnet Mask and select MTU.
MTU (Maximum Transmission Unit): Select MTU as larger than 1500 byte for the purpose of improving

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English