HIKVISION DS-A81024S/192 User Manual

Storage System User Manual
42
Add Backup Hybrid SAN
3. Enter the backup Hybrid SAN IP address.
4. Click OK.
5. Optionally, check Synchronization and Delete the videos saved in backup CVR after synchronization
succeeded, and click Modify to enable them.
 Synchronization: Once master Hybrid SAN recovers to normal, backup Hybrid SAN uploads the videos
back to master Hybrid SAN.
 Delete the videos saved in backup CVR after synchronization succeeded: Delete the videos in backup
Hybrid SAN once they are uploaded to master Hybrid SAN.
5.4.2 Delete Backup Hybrid SAN
Steps:
1. Go to Hybrid SAN > N + 1.
2. Select backup Hybrid SAN you want to delete.
3. Click Delete.
4. Click OK.
5.4.3 Add Master Hybrid SAN
Before you start:
1. Log into backup Hybrid SAN and enter N+1 Management interface.
2. Add the same encoding devices in backup Hybrid SAN, which have been added in master Hybrid SAN. For
details, refer to chapter 6.3.2 Add Encoding Device. Ensure the name of encoding devices from different
backup Hybrid SANs vary from each other.
3. Delete the added encoding devices in step 2.
4. Add schedules for encoding devices in backup Hybrid SAN the same as schedule in master Hybrid SAN.
Steps:
1. Go to Hybrid SAN > N + 1.
2. Click Add Master Hybrid SAN.

HIKVISION DS-A81024S/192 Specifications

General

Brand	HIKVISION
Model	DS-A81024S/192
Category	Storage
Language	English