HIKVISION DS-K1T803F User Manual

Fingerprint Access Control Terminal·User Manual
109
5.9.1 Access Control Parameters
Purpose:
After adding the access control device, you can configure its access control point (door)’s
parameters, and its card readers’ parameters.
Click Access Control Parameters tab to enter the parameters settings interface.
Door Parameters
Steps:
1. In the controller list on the left, click to expand the access control device, select the door
(access control point) and you can edit the information of the selected door on the right.
2. You can editing the following parameters:
 Door Magnetic: The Door Magnetic is in the status of Remain Closed (excluding special
conditions).
 Exit Button Type: The Exit Button Type is in the status of Remain Open (excluding special
conditions).

HIKVISION DS-K1T803F Specifications

General

Brand	HIKVISION
Model	DS-K1T803F
Category	IP Access Controllers
Language	English