To Next Page

To Previous Page

Fingerprint Access Control Terminal·User Manual

 Tampering detection, unlocking overtime alarm, invalid card swiping over times alarm,

duress card alarm, and so on

 Accurate data and time display provided by built-in electronic clock

 Check the device running status via the Watchdog. When exception status occurs, the

system will reboot automatically

 Data can be permanently saved after power-off

 Remotely control via the iVMS-4200 client software

Note: Device with the model of DS-K1T803MF(L) supports collecting or applying fingerprint

pictures locally.

 Supports the third party arming

 Supports transmitting data via Hik EHome to realize the whole network transmitting.

 Activates via device

1.2.2 DS-K1T803F/MF/EF-1 and DS-K1T804F/MF/EF-1 Features

 Doorbell ringtone settings function

 2.4-inch LCD display screen

 Transmission modes of wired network (TCP/IP)

 Max. 3,000 users, 3,000 fingerprints and 100,000 access control events storage

 Export the report and upgrade the device via the USB disk.

 Adopts the optical fingerprint module, supporting 1:N mode (fingerprint, card + fingerprint)

and 1:1 mode (card + fingerprint) (DS-K1T803F-1 and DS-K1T804-1 does not support

swiping card.)

 Multiple authentication modes: card, fingerprint, card + fingerprint, card + password,

fingerprint + password, card + fingerprint + password, terminal authentication, user

authentication and so on. (DS-K1T803F-1 and DS-K1T804-1 does not support swiping card.)

 EM card reading (DS-K1T803EF-1/DS-K1T804EF-1)

 Mifare card reading, including card No. reading (DS-K1T803MF-1/DS-K1T804MF-1)

 CPU card reading, including CPU card serial No.

 Secure door control unit accessing via RS-485 connection