HIKVISION DS-K1T803F User Manual

Fingerprint Access Control Terminal·User Manual
50
4.7 Other Management
4.7.1 Transferring Data
Purpose:
You can export the ACS parameters and the attendance data. You can also import the ACS parameters
from the USB disk.
Exporting Data
Steps:
1. Insert the USB disk to the USB interface.
Note: The device will detect the USB disk memory before exporting the report. If the memory is
not enough, the device will pop up a prompt to remind you.
2. In the Export interface, select Export ACS Para (Export Access Control System Parameters)or Export
Attendance Data.
3. Press the OK key, the ACS parameters or the attendance data will be saved in the USB disk.
Notes:
 Support the USB disk of FAT32 format.
 The USB disk memory should be from 1G to 32G. Make sure the USB disk free space is up to
512M.
Importing Data
Steps:
1. Insert the USB disk to the USB interface.

HIKVISION DS-K1T803F Specifications

General

Brand	HIKVISION
Model	DS-K1T803F
Category	IP Access Controllers
Language	English