To Next Page

To Previous Page

10.

Oponal: Click to delete the keyfob.

5.6.3 Add/Edit/Delete User

Administrator can add user to the security control panel, edit the user informaon, or delete the

user from the security control panel. You can also assign dierent permissions to the new user.

Steps

1. In the client

soware, select the device on the Device Management page and click , or enter

the device IP address in the address bar of the web browser and log in.

2. Click

Conguraon → User Management → User to enter the User Management page.

3. To compliant the EN requirement, slide the block to enable the installer and maintenance .

Note

• The default user name of admin account is admin. The password is the

acvaon password.

• The default password of the installer is installer12345, and the default password of the

maintenance (for Italian, the user name is costruore) is hik12345. These password will have

to be changed when rst connected.

•

The Italian user name of admin is admin.

Table 5-4 User Name of Installer

Language User Name Language User Name

English installer Russian монтажник

Italian installatore French installateur

Polish instalator Spanish instalador

German errichter Portuguese instalador

Turkish kurulumcu Czech technik

4. Click Add.

5. Set the new user's

informaon in the pop-up window, including the user type, the user name,

and the password.

Hybrid Security Control Panel User Manual

HIKVISION DS-PHA20-P User Manual

Other manuals for HIKVISION DS-PHA20-P