HIKVISION DS-PHA20-P User Manual

10.
Oponal: Enable the user in the Enable User column to allow the enabled user operang the
device.
11. Oponal: Select an user and click Edit and you can edit the user's informaon and permission.
12.
Oponal: Delete a single user or check mulple users and click Delete to delete users in batch.
Note
The admin, the installer and the maintenance cannot be deleted.
Add/Edit/Delete Keyfob
You can add keyfob to the security control panel and you can control the security control panel via
the keyfob. You can also edit the keyfob informaon or delete the keyfob from the security control
panel.
Steps
1. In the client
soware, select the device on the Device Management page and click , or enter
the device IP address in the address bar of the web browser and log in.
2. Click Conguraon → User Management → Keyfob to enter the Keyfob Management page.
Figure 4-31 Keyfob Management
3. Click Add and press any key on the keyfob.
4. Set the keyfob linked device type and linked device No..
5. Click OK.
6.
Oponal: Click to edit the keyfob informaon.
Hybrid Security Control Panel User Manual
49

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English