HIKVISION DS-PHA20-P User Manual

Operaons for All Areas
• Away: When all the people in the
detecon area leave, turn on the Away mode to arm all zones
in all areas aer the dened dwell me.
• Stay: When the people stays inside the detecon area, turn on the Stay mode to arm all the
perimeter burglary
detecon (such as perimeter detector, magnec contacts, curtain detector in
the balcony) set in all the zones of all areas. At the meanme, the detectors inside the detecon
area are bypassed (such as PIR detectors). People can move inside the area and alarm will not be
triggered.
• Disarm: In Disarm mode, all the zones of all areas will not trigger alarm, no maer alarm events
happen or not.
• Clear Alarm: Clear all the alarms triggered by the all the zones of all the areas.
4.3.10 Bypass Zone
When the area is armed, you can bypass a parcular zone as you desired.
Before You Start
Link a detector to the zone.
Steps
1. On the device list page, tap the security control panel and then log in to the device (if required)
to enter the Area page.
2. Select a zone in the Zone tab to enter the
sengs page.
3. Select a zone and enter the Sengs page.
Figure 4-49 Zone Sengs Page
Hybrid Security Control Panel User Manual
74

HIKVISION DS-PHA20-P Specifications

General

Brand	HIKVISION
Model	DS-PHA20-P
Category	Control Panel
Language	English